Example E-1
Paste this
Example CustomerPlease quote a room, internal size 40 x 8 x 9 ft.Walls 100 mm, ceiling 100 mm, floor 100 mm.What the tool does: reads the room and prices it.
This is an early trial of the layout-to-quotation tool, on invented data. This page sets out what it can and cannot do today, gives you enquiries to paste and drawings to send, and walks you through it step by step, with what you should see at each step.
Your own rate card and quotation details. Quotations are priced from the rates you enter. This page sets out what the tool can and cannot do today.
Please don't type real enquiries, your customers' names or your own rates here yet.
Use the enquiries on this page, or make up your own. If something real goes in by mistake, tell us: reply to the message we sent you.
The same goes for drawings. A real customer's drawing carries that customer's name and address in its title block, so please send one of the example drawings on this page, or a drawing you made up with no customer's details on it.
Quotations are priced only from the rates you log on your rate card. A row with no rate is not priced, and a quotation with an unpriced line cannot be issued.
Please don't send a customer's drawing yet: it carries the customer's name and address in its title block. Type the enquiry instead.
Each one is invented. Paste it into the tool's enquiry box exactly as it is, and compare what the tool does with what is written here.
Paste this
Example CustomerPlease quote a room, internal size 40 x 8 x 9 ft.Walls 100 mm, ceiling 100 mm, floor 100 mm.What the tool does: reads the room and prices it.
Paste this
Example CustomerPlease quote a room, internal size 30 x 10 x 10 ft.Walls 100 mm, ceiling 100 mm, floor 100 mm.What the tool does: reads the room and prices it.
Paste this
Example CustomerPlease quote a room, internal size 24 x 11 x 12 ft.Walls 80 mm, ceiling 80 mm, floor 100 mm.What the tool does: reads the mixed thicknesses and prices the room.
Paste this
Example CustomerPlease quote a room, internal size 40 x 8 x 9 ft.Walls 100 mm, ceiling 100 mm.What the tool does: refuses it, makes no quotation, and says why.
The tool says
no thickness was given for: floor; a missing thickness is not assumed to match another facePaste this
Example CustomerPlease quote two rooms, internal sizes 40 x 8 x 9 ft and 20 x 8 x 9 ft.Walls 100 mm, ceiling 100 mm, floor 100 mm.What the tool does: refuses it, makes no quotation, and says why.
The tool says
2 room sizes were found in one message; this reader handles one room at a timePaste this
Example CustomerPlease quote a room of 40 x 8 x 9 ft.Walls 100 mm, ceiling 100 mm, floor 100 mm.What the tool does: refuses it, makes no quotation, and says why.
The tool says
the message does not say whether the size is internal or external; this is worth several per cent and will not be assumedEach one is made up and drawn on the one convention the tool reads. Download it, open the tool's page “Price from a drawing”, choose the file, type Example Customer and a height of 3000 mm, and choose 100 mm for both panel thicknesses. Then compare what the tool does with what is written here.
A plan of closed rooms with solid partitions and doors.
Download example drawing A, a PDF
What the tool does: measures every partition run and room, and prices every line, so the quotation can be issued.
Several rooms with solid partitions, one of them L-shaped.
Download example drawing B, a PDF
What the tool does: measures the L-shaped room along its own outline and bills its ceiling on that floor area, not on the box around it, and prices every line.
A plan with glazed partitions beside solid ones.
Download example drawing C, a PDF
What the tool does: measures the glazed runs like the solid ones and prices all the other lines. The invented rate card prices insulated panels, and a glazed partition is not one, so the tool names each glazed run as unpriced, and the quotation cannot be issued until those lines are resolved.
With every example the quotation prices no floor: the tool prices none from a drawing. A closed room's ceiling is billed on the floor area measured on the plan.
Twelve steps, in order. Each says what to do, then what you should see.
Sign in. Open the trial link. Enter your username and password, then the six-digit code from your authenticator app.
You should see: the start page, with the trial banner.
Type an enquiry. Paste example E-1.
You should see: the room read back in millimetres: length 12192, width 2438.4 and height 2743.2 (40 × 8 × 9 ft), the sizes internal, with walls, ceiling and floor at 100 mm.
Price it.
You should see: a quotation marked DRAFT and SYNTHETIC, showing:
Printed on the quotation
SYNTHETIC — invented values, not any client's rates.DRAFT — not for sending; the number is allocated at issue.The rate card. The quotation names its rate card by a working name. It is the invented rate card, version 2: every price on it is made up.
GST. GST is extra. The invented card sets no GST rate, so the quotation works out no GST amount, and says so at its foot.
The intake note. It says the tool quotes from a drawing file or from typed room sizes. Both work in this trial; a drawing file must be a PDF drawn on the one convention the tool reads, as the example drawings are.
Issue it.
You should see: the DRAFT line gone, a number such as SYN-000001, and a valid-until date seven days later.
Find it in the register.
You should see: the quotation listed with its number, date, card version, valid-until date and the status “issued”. Then mark it “sent”.
Check the validity date.
You should see: the valid-until date. Come back after it: the quotation shows “lapsed”. You marked it sent in step 5, before it lapsed, so you can still mark it won or lost. A quotation not marked sent before it lapses cannot be marked sent: the tool says it has lapsed and asks for a re-quote.
See the rate card's versions.
You should see: two versions with their dates, the older one superseded, and each quotation naming the version that priced it.
Leave something out. Paste example E-4.
You should see: “no thickness was given for: floor; a missing thickness is not assumed to match another face”, and no quotation.
Try a photo of a layout.
You should see: “Send the drawing file, or type the enquiry.” The photo is not kept.
Where to send it. Send the photo from the page “Price from a drawing”, which takes a file of up to 25 megabytes, so a phone photo reaches the tool and you see its answer.
Try a drawing file (a PDF). Send example drawing A from the page “Price from a drawing”, with a height of 3000 mm and panels of 100 mm.
You should see: what the tool read, as the quotation will print it, and the area table. Price it: the quotation prices no floor, and you can download the plan redrawn as a drawing file.
Sign out.
You should see: the sign-in page again.
Tell us what read right, what read wrong, and what you expected that was not there.
Reply to the message we sent you. We answer Monday to Saturday, 9:00 to 18:00, India time.
After the walk, tell us what read right, what read wrong, and what you expected that was not there.
Reply to the message we sent you.
Tell us what read right, what read wrong, and what you expected that was not there.
You have signed out.
You have been signed out.
The tool says
The tool signs you out after 30 minutes without use, and at the latest half a day after you sign in. Sign in again to carry on.
Step 1 of 2: your username and password. Then the six-digit code from the authenticator app on your phone.
Sign in with your username and password.
Step 2 of 2: the six-digit code from the authenticator app on your phone.
The tool says
The trace id
You may still be signed in. Try again in a minute. If it happens again, reply to the message we sent you and quote the trace id.
The tool did not answer, so you may still be signed in. Check that you are online, then sign out again.
You are signed in as .
One room at a time: its inside size with the unit, and the thickness of the walls, ceiling and floor. The tool reads it back, or says what is missing. Six examples to paste are on What you can try.
Every quotation you issue, with its number, date, card version, valid-until date and status. You mark each one sent, won or lost there.
Its versions and their dates: the older one superseded, nothing overwritten.
Its versions and their dates: a new version never overwrites an old one.
Six example enquiries to paste, and the walk, step by step.
What it can do today, and what is not in it yet.
The tool signs you out after 30 minutes without use, and at the latest half a day after you sign in. Reloading the page, or opening the tool in a new tab, asks you to sign in again.
When you finish, sign out at the top of the page.
Paste or type one room. The tool reads it back; then you choose the finish and price it.
One room: its inside size with the unit, and the thickness of the walls, ceiling and floor. Start with a made-up customer name on its own line, as the examples do.Start with the customer's name on its own line.
The tool says
No quotation was made. Change the enquiry and read it again.
The box was empty when you pressed the button. Paste or type one room, then read it.
Need an example? The page What you can try has six to paste.
The tool read one room. Check it against the enquiry before you price it.
The tool holds every size in millimetres. One foot is 304.8 mm.
The tool says
The tool lists what it assumed. The first line is a convention, not something your enquiry says: it takes the three figures as the length, the width and the height, in that order, and asks you to check that. The second line is the tool's own stock wording, written whenever your enquiry has “internal” or “external” in it: check it against what your enquiry says. The marks in brackets are the tool's own shorthand: one for a convention it applies, one for what it takes your enquiry to state.
The tool needs the steel sheets of the panels: the gauge and the colour of the top sheet and of the bottom sheet, from the invented rate card's listsyour rate card's lists. Each starts at the first value on the card.
What this rate card prices
Each row of the card prices one panel kind: wall or roof, its thickness, and the top and bottom sheet gauge and colour. A panel with no row, or a blank rate, prints unpriced. A choice below with no rate for this enquiry's thickness stays on the list, greyed, with the words “no rate on this card”; each list starts at its first choice that has a rate.
The tool prices the ceiling and the floor as roof panels. If the card has no rate for a choice, the tool still makes the quotation, marks that line unpriced and names the missing rate. A quotation with an unpriced line cannot be issued.
With freight extra and no amount, the quotation states a sub-total but no total. The house rules come from the card and are printed on the quotation.
The card in force lists no doors, accessories or production and dispatch items to choose from. The quotation has the panels only.
Every door, accessory and production and dispatch item on the card in force. Tick each one the job needs and give its quantity in the unit shown beside the box; the box opens when the item is ticked. Each is priced at the invented rate card's own ratethe rate on your rate card and printed on the quotation as its own line, quantity times rate. With nothing ticked, none of these items is added to the quotation.
Doors are counted in whole sets, a set being what the card says it includes. An accessory marked “worked out from the room” takes its length from the room's size the tool read: tick it, and there is no quantity to give.
Nothing ticked from the rate card.
item ticked from the rate card.items ticked from the rate card.
Not priced yet. A ticked item needs a quantity of more than zero. Give one in its marked box, or untick the item.
The tool says
The tool says
A drawing file, the PDF of a plan, is priced on its own page, with what the plan does not show: the customer's name, the height of the partitions and the thickness of the panels, the last two in the unit you use.
The tool says
You have been signed out. The tool signs you out after 30 minutes without use, and at the latest half a day after you sign in. What you typed is still in the box above: copy it before you sign in again.
Send the drawing as a PDF, with what the plan does not show. The tool measures page 1; then you choose the finish and price it.
The tool reads a drawing made on one drawing convention: the walls, the glazing, the doors and the dimensions each drawn in its own line colour and weight, with the dimensions written on the plan. A drawing that departs from it anywhere, even in one line, is refused with the tool's reason; nothing on it is corrected or guessed.
Need a drawing to try? The page “What you can try” has three example drawings to download, each made up and drawn on this convention. Please don't send a real customer's drawing: it carries that customer's name and address in its title block. Send an example, or a drawing you made up with no customer's details on it.
The tool reads only drawings made on its one convention. Please don't send a customer's drawing yet: it carries the customer's name and address in its title block.
The drawing
A PDF saved from the drawing program, up to 25 megabytes, with the plan on page 1. The tool measures page 1 only, and refuses a file whose later page holds a second plan.
No file chosen.Chosen:
The tool needs all four to price the drawing. Type the height and the two thicknesses in the unit you use: the page turns each into whole millimetres, to the nearest millimetre (a half rounds up), and shows the figure it will send before you send it.
The tool says
That is the answer the page got when it asked for the rate card, so it has no thicknesses to offer. Reload the page to ask again, or type each thickness under “Another thickness”.
A made-up name, as in the examples.The customer's name.
The tool says
The tool says
Choose a thickness the rate card lists, or type another. Inches are shown to two decimal places.
Reading the thicknesses the rate card lists
The rate card could not be read, so there is no list to choose from.
The tool says
Choose a thickness the rate card lists, or type another. Inches are shown to two decimal places.
Reading the thicknesses the rate card lists
The rate card could not be read, so there is no list to choose from.
The tool says
Leave it empty and the tool notes the time you send the drawing.
The tool says
The tool says
A PDF made by scanning or photographing a paper drawing holds a picture of the lines, not the lines themselves, so there is nothing to measure. The file was not kept.
house-v1 is the name of the one drawing convention the tool reads. One departure anywhere on the plan is enough for this answer, such as a line in a colour or weight the convention does not use, a dashed or hatched line, partitions that overlap, a door drawn across two partitions, or the layers and clipping many drawing programs add when they save a PDF. A file with a second plan on a later page gets this answer too: the tool takes one plan to a file. The tool does not say where the drawing departs, and it corrects nothing. The file was not kept.
A dimension string is a measurement written on the plan beside the line it measures, such as 4300 beside a wall. A scale written on the sheet, such as 1:50, is not enough on its own. The file was not kept.
The tool opens only PDF files, and reads only those drawn on its one drawing convention: a drawing made another way and saved as a PDF is refused too. The file was not kept.
The tool takes a drawing of up to 25 megabytes; this file is larger. Nothing in it was read or kept.
A picture of a drawing, or a photo of a sketch, is not measured. The file was not kept.
The part of the tool that reads drawings is not running on this trial just nowjust now. Typed enquiries still work. Nothing was kept. Tell us by replying to the message we sent you.
This file is larger than the 25 megabytes the trial takes, so it was stopped before the tool saw it. Nothing in it was read or kept.
The tool keeps a drawing only when it reads it; a file it refuses is not kept.
The tool read the drawing. Check what it read against the plan before you price it.
Printed on the quotation
These are the lines the quotation prints about the drawing, in the same order. house-v1 is the name of the one drawing convention the tool reads. A dimension string is a measurement written on the plan beside the line it measures; the tool works out the scale from them. Entered means the figure is yours, not measured.
Page 2 of this file holds no plan, so the tool measured page 1 and the quotation says so. A file whose later page holds a second plan is refused.
Pages 2 to of this file hold no plan, so the tool measured page 1 and the quotation says so. A file whose later page holds a second plan is refused.
The tool prices no floor from a drawing, and bills a closed room's ceiling on the floor area measured on the plan. Any drawing not made on house-v1 is refused.
The figures the tool measured from the drawing, as it gives them: lengths in millimetres, areas in square metres. Each one is marked measured.
| Room | Outline | Length | Width | Floor area | Figure |
|---|
A room that is not a rectangle, such as , is measured along its own outline, not as the box around it.
| Run | Length | Doors | Less doors | Net length | Figure |
|---|
Net length is the run's length less its door openings.
| Space | Figure |
|---|
A space whose walls do not close is not measured. It is on the quotation as a line with no price.
The tool needs the steel sheets of the panels: the gauge and the colour of the top sheet and of the bottom sheet, from the invented rate card's listsyour rate card's lists. Each starts at the first value on the card.
What this rate card prices
Each row of the card prices one panel kind: wall or roof, its thickness, and the top and bottom sheet gauge and colour. A panel with no row, or a blank rate, prints unpriced. A choice below with no rate for this drawing's thicknesses stays on the list, greyed, with the words “no rate on this card”; each list starts at its first choice that has a rate.
The ceilings take the roof panels. If the card has no rate for a choice, the tool still makes the quotation, marks that line unpriced and names the missing rate. A quotation with an unpriced line cannot be issued.
With freight extra and no amount, the quotation states a sub-total but no total. The house rules come from the card and are printed on the quotation.
The card in force lists no doors, accessories or production and dispatch items to choose from. The quotation has the panels only.
Every door, accessory and production and dispatch item on the card in force that is priced from a quantity given here. Tick each one the job needs and give its quantity in the unit shown beside the box; the box opens when the item is ticked. Each is priced at the invented rate card's own ratethe rate on your rate card and printed on the quotation as its own line, quantity times rate. With nothing ticked, none of these items is added to the quotation.
The doors read on the drawing are only taken out of the wall area and are not priced; tick a door type here to price door sets. Doors are counted in whole sets, a set being what the card says it includes. An accessory the card works out from the room's size is priced only on a typed enquiry, so it is not listed here.
Nothing ticked from the rate card.
item ticked from the rate card.items ticked from the rate card.
Not priced yet. A ticked item needs a quantity of more than zero. Give one in its marked box, or untick the item.
The tool says
The tool says
One quotation: its summary, then the quotation as the tool prints it.
Read it through, then issue it.
Read it through. As it stands, it cannot be issued.
Issued: its number and its dates are fixed.
Its valid-until date has passed.
Opening the quotation
The tool says
The link may be out of date. Every quotation you issue is in the register.
You have been signed out. The tool signs you out after 30 minutes without use, and at the latest half a day after you sign in.
Sign in again to open the quotation.
Sub-total (excluding GST)
Total (excluding GST)
Printed on the quotation
To see a total, price the enquiry again with freight included.
Issuing gives it the next number in your register, and its prices are then firm for 7 days. A number is never used twice.
The tool says
The first line is why it cannot be issued; the others name each line the card has no rate for. The tool does not guess a missing rate. Change the enquiry or the finish and price it again; this draft stays as it is.
The lines the tool did not price are named in the area table, each under its run, room or space. The tool does not guess what it cannot measure or has no line for. Only a quotation with every line priced can be issued.
Where the tool says the card has no rate for a line, the card has no rate for that panel thickness with that finish. Send the drawing again from “Price from a drawing”, choose a thickness the card lists, and choose the finish again; this draft stays as it is.
The tool says
It is in the register. When you send it to the customer, mark it sent there; after that, mark it won or lost. The tool sends nothing itself.
It was not marked sent before its valid-until date, and a lapsed quotation cannot be marked sent. Price its enquiry again: the new quotation gets a new number and new dates. For a quotation priced from a drawing, send the drawing again from “Price from a drawing”.
It was marked sent on , before it lapsed, so you can still mark it won or lost in the register. To quote it again, price its enquiry again: the new quotation gets a new number and new dates. For a quotation priced from a drawing, send the drawing again from “Price from a drawing”.
Printed on the quotation
The same lines as when the tool read the drawing. house-v1 is the name of the drawing convention it reads; a dimension string is a measurement written on the plan.
Printed on the quotation
rule R3 is the invented rate card'syour rate card's house rule for pricing a floor.
If the job needs a floor, this quotation does not cover it. The tool reads drawings made on house-v1 only, and refuses any other.
The figures the tool measured from the drawing, as it gives them: lengths in millimetres, areas in square metres. Each line it did not price has the tool's own sentence under it.
| Room | Outline | Floor area | Its ceiling line, as worked on the quotation | Figure |
|---|
| Run | Length | Doors | Less doors | Net length | Figure |
|---|
Net length is the run's length less its door openings.
| Space | Figure |
|---|
A space whose walls do not close is not measured. It is on the quotation as a line with no price.
The plan redrawn as the tool measured it, in millimetres and on layers. It is a drawing file, which most drawing programs open.
The tool says
On a draft the file is made when you ask for it, so it carries that day's date. When you issue the quotation, the file made then is kept with it and does not change.
This is the file made when the quotation was issued, with that day's date on it. It is kept with the quotation and does not change, however often you download it. Its name is the quotation's number.
See the drawing here on the page, without opening it in a drawing program.
The tool says
The preview could not be drawn from this file. The download above still gives you the whole drawing.
item in the drawing file is not shown in this preview.
items in the drawing file are not shown in this preview.
The drawing preview is shown.
This is a preview of the drawing file; open the file in your drawing program for the exact drawing.
The quotation, as the tool prints it
The rate card. The quotation names its rate card by a working name. It is the invented rate card, version : every price on it is made up.
The rate card. The quotation names its rate card by its name. It is your rate card, version : every price on it is one you logged.
GST. GST is extra. The invented card sets no GST rate, so the quotation works out no GST amount, and says so at its foot.
Every quotation you issue, newest first, with its number, date, card version, valid-until date and status. Mark each one sent, won or lost here.
Opening the register
No quotations yet. When you issue one, it appears here with its number, date, card version, valid-until date and status.
The tool says
You have been signed out. The tool signs you out after 30 minutes without use, and at the latest half a day after you sign in.
Sign in again to open the register.
| Number | Customer | Issued | Valid until | Card version | Status | Sub-total (excluding GST) | Mark it |
|---|
A quotation lapses by itself after its valid-until date, and a lapsed quotation is not marked sent: price its enquiry again for a new quotation with a new number, or, for one priced from a drawing, send the drawing again from “Price from a drawing”. One marked sent before it lapsed can still be marked won or lost. The sub-total is the quotation's figure before GST; whether freight is in it is printed on the quotation.
The tool says
Its prices are no longer firm, so it cannot be marked sent. Open to price its enquiry again.
The rate card that prices your quotations in this trial. Every price on it is made up. A new version never overwrites an old one: the old one stays, marked superseded.
The rate card that prices your quotations. Every price on it is one you logged. A new version never overwrites an old one: the old one stays, marked superseded.
Opening the rate card
No rate card yet. When one is in place, its versions appear here with their dates, and the one in force today is marked.
The tool says
You have been signed out. The tool signs you out after 30 minutes without use, and at the latest half a day after you sign in.
Sign in again to see the rate card.
| Version | In force from | Status | In force today | Its rates |
|---|
Each quotation names the version that priced it: in the register, and in the card line printed on the quotation.
Version is issued, in force from . It is in the list above, and its preview is shown below.
The tool says
Write what changed in this version before you preview or issue it.
What changed must fit on one line.
Choose the day this version comes into force.
A rate is a plain number with up to two decimals, or empty for a blank. The marked rate is not.
A thickness, a door leaf size or a number of days is a whole number above zero. The marked one is not.
You are signed in as an administrator, so you can issue a new version. It starts as a copy of the version in force; you change what needs changing, preview it, then issue it. Nothing is overwritten: the version in force stays on record, marked superseded.
Opening the version in force
Nothing is issued yet. This is the version as it will be sent; the tool checks the whole of it when you issue it.
What changed in this version
Your changes are not issued. Discard them?
Opening this version
The tool says
Read only. This is the version as the tool holds it; nothing here can be changed from this page.
The card says
What changed in this version, as the card says it
Price basis: the three options
Price basis says what the card's rates cover.
Ex works: the rates are for the material at the works.
Delivered: the rates include delivery to the site.
Not set on this card: the card states no basis.
It is kept with each quotation priced on this version, but is not printed on it.
Freight and unloading print from their own terms, so set "Freight" to match.
Freight
Freight is the starting setting for each quotation: extra, on top of the rates, or included in the rates.
Included: the quotation says its amounts include delivery to the site address.
Extra, with no freight amount entered: the quotation states a sub-total but no total, and says why.
The person pricing can choose freight included for one quotation, and the change is recorded with it.
Unloading
Unloading is always the receiver's scope: the receiver arranges and pays for it.
Every quotation prints an unloading line, and unloading is never part of the total.
"Unloading, value" is optional: an indicative cost, shown for the receiver's information.
Left empty, the line says that no unloading charge is included.
Valid for, in days
The number of days a quotation's prices stay firm: a whole number, at least one.
Left empty, the default of seven days applies.
A draft states the validity it will carry once issued.
An issued quotation states the days and the date it is valid until.
The days come from the version the quotation was priced on.
GST percent
Type a percentage: up to two digits, with up to two decimals.
Leave it empty when the rate is not set.
No GST amount is ever worked out; totals exclude GST.
With a rate, the quotation says GST at that percent is charged in addition, at the rate in force on the invoice date.
Without one, it says GST is charged in addition and the rate is not set on this card.
Billing rules
Settings for three house rules, used on each quotation priced on this version.
Round each panel's area up to the whole square foot, or bill its exact area.
Bill a cut piece as a full panel, at its cut width, or nested with other off-cuts into full panels, each billed once.
Bill the floor as roof panels, or leave it out of the panel lines.
Each quotation prints the rules it used.
Conventions
The conventions say how the tool reads sizes and counts quantities.
Each has one setting today, copied forward to every new version.
Quantities are counted by panel area, worked and billed in square feet.
Dimensions are measured to interior clear: the clear sizes inside the room.
Wall height is measured to internal clear: the clear height inside the room.
Panel rates
Each row prices one panel kind: wall or roof, thickness in millimetres, and the top and bottom sheet gauge and colour.
Its rate is per square foot.
The ceiling, and the floor when billed, are priced from roof rows.
No two rows may have the same choices.
A panel with no row, or a blank rate, prints unpriced.
The quotation then states no total and cannot be issued until every line is priced.
Doors
Each row is a door type with its leaf width and height in millimetres.
"What a set includes" is optional.
The rate is per door; doors are counted by number.
The quotation prints the "How it prints" words, then what a set includes in brackets.
Left empty, "How it prints" is made from the door type.
A blank rate prints unpriced, and the quotation cannot be issued.
Accessories
Each accessory has a unit, a rate per unit and its printed words.
Units: number, running metre, kilogram, piece, set, packet or square foot.
"Unit detail" is optional and prints in brackets after the unit.
Its quantity is typed in on the job, or worked out from the room's perimeter, length, width or height.
Numbers, pieces, sets and packets are counted whole.
Left empty, "How it prints" is made from the name and unit.
Structure items
Structure items are the production and dispatch items.
Each has a unit and a rate per unit, and its quantity is typed in on each job.
It prints on the quotation under its item name.
Under "On the quotation", choose "A priced line".
An item set to a checklist line cannot yet be added to a quotation.
The tool answers with the version that was in force on that day.
The tool says
The tool names the card by its working name. The invented card's first version came into force on , so no version was in force before that date.
The tool says
The tool did not answer. Check that you are online, then try again. If it keeps happening, reply to the message we sent you.
Who issues your quotations, the notes, exclusions and payment terms they carry, and who signs them. Each change is logged as a new version: an older version is never overwritten, every quotation not yet issued prints the version in force, and a quotation already issued keeps the details it was issued with.
Opening the quotation details
No quotation details are logged yet. Until a first version is logged, each quotation says in their place that they are not yet set.
The tool says
You have been signed out.
Sign in again to open the quotation details.
Only an administrator can change the quotation details.
The first version of the quotation details is set up with the tool, not on this page. Once a first version is in force, an administrator can change it here.
A quotation will print these lines, under these headings, in this order. Logged, they become version , and every quotation not yet issued prints them from then on.
Logged as version . Every quotation not yet issued now prints these details.
The tool says
The part of the details it names:
Who issues your quotations, the notes, exclusions and payment terms they carry, and who signs them.